Batteries Digital Product Passport
Everything you need to know about Digital Product Passport requirements for the Batteries sector under the Battery Regulation (EU) 2023/1542.
Required DPP Fields
These fields are mandatory for Batteries products under the ESPR regulation. Every Digital Product Passport in this sector must include these data points.
| Field | Description | Example | |
|---|---|---|---|
| 01 | Battery Category | Category per Regulation 2023/1542: industrial, EV, LMT, SLI, or portable | e.g. Industrial battery >2 kWh |
| 02 | Battery Weight (kg) | Total mass of the battery in kilograms | e.g. 12.5 |
| 03 | Manufacturing Date | Date the battery was manufactured | e.g. 2026-01-15 |
| 04 | Manufacturing Place | Place or facility where the battery was manufactured | e.g. Gigafactory Berlin, Germany |
| 05 | Carbon Footprint | Total greenhouse gas emissions from production (kg CO2e) | e.g. 61 kg CO2e per kWh |
| 06 | Carbon Footprint Performance Class | Performance class from A (best) to G (worst) per Article 7 | e.g. B |
| 07 | Carbon Footprint per Lifecycle Stage | Share of CO2e per lifecycle stage: raw material acquisition, manufacturing, distribution, end-of-life | e.g. Raw materials 45%, Manufacturing 30%, Distribution 10%, End-of-life 15% |
| 08 | Supply Chain Due Diligence | Due diligence compliance status and policy reference per Articles 47-52 | e.g. Compliant — OECD due diligence guidance followed, policy ref: SC-DD-2026-001 |
| 09 | Battery Chemistry | Type of battery chemistry used | e.g. Lithium-ion NMC (Li-NMC) |
| 10 | Material Composition | Breakdown of materials used in the product | e.g. Lithium 4%, Nickel 12%, Cobalt 5%, Graphite 16%, Aluminium 20%, Steel 25% |
| 11 | Critical Raw Materials | List of critical raw materials present (>0.1% by weight) and their sources | e.g. Cobalt (DRC, 12%), Lithium (Chile, 8%), Nickel (Indonesia, 15%) |
| 12 | Hazardous Substances | REACH/CLP hazardous substances present in the battery | e.g. None above threshold / Cobalt compounds (CAS 7440-48-4) |
| 13 | Dismantling Information | Safe dismantling and disassembly instructions including exploded diagrams | e.g. See technical document TD-DISM-001 for step-by-step disassembly |
| 14 | Spare Parts Sources | Spare part numbers and where to obtain them | e.g. BMS module (P/N BMS-200), available from manufacturer portal |
| 15 | Safety Measures for Dismantling | Safety measures and precautions for handling during dismantling | e.g. Discharge to <50V before opening, use insulated tools, wear PPE |
| 16 | Recycled Content (%) | Percentage of recycled materials used | e.g. 30% |
| 17 | Recycled Cobalt Content (%) | Percentage of recycled cobalt in active materials (min 16% from Aug 2031) | e.g. 20 |
| 18 | Recycled Lead Content (%) | Percentage of recycled lead (min 85% from Aug 2031) | e.g. 90 |
| 19 | Recycled Lithium Content (%) | Percentage of recycled lithium (min 6% from Aug 2031) | e.g. 10 |
| 20 | Recycled Nickel Content (%) | Percentage of recycled nickel (min 6% from Aug 2031) | e.g. 12 |
| 21 | Renewable Content Share (%) | Percentage of renewable content in the battery | e.g. 5 |
| 22 | Collection & Recycling Info | How to dispose of or recycle the product at end of life | e.g. Return to manufacturer or local WEEE collection point |
| 23 | Battery Capacity | Rated capacity of the battery | e.g. 5,000 mAh |
| 24 | Nominal Voltage | Nominal voltage of the battery (Annex XIII 1(h)) | e.g. 3.7 |
| 25 | Rated Capacity (Ah) | Rated capacity of the battery in ampere-hours | e.g. 100 Ah |
| 26 | Capacity Fade (%) | Capacity fade at 80% of lifecycle in percent | e.g. 20% fade after 1,500 cycles |
| 27 | Original Power Capability (W) | Original power capability of the battery model in watts (Annex XIII 1(i)); its limits go in Power Limits and Temperature Range. The remaining power of one battery is set per battery under Individual batteries. | e.g. 5,000 W |
| 28 | Internal Resistance (mOhm) | Internal resistance of the battery in milliohms | e.g. 15 mOhm |
| 29 | Expected Lifetime (Cycles) | Expected lifetime of the battery in charge/discharge cycles | e.g. 3,000 cycles |
| 30 | Expected Calendar Life (Years) | Expected calendar life of the battery in years | e.g. 8 years |
| 31 | Temperature Range | Temperature range the battery can withstand during operation and storage | e.g. -20°C to +60°C (operation), -40°C to +70°C (storage) |
| 32 | Separate Collection Symbol | Whether the separate collection (crossed-out wheelie bin) symbol is present | e.g. Yes |
| 33 | Hazardous Substance Markings | Cadmium, lead, or other hazardous substance markings on the battery | e.g. Pb symbol present (lead content >0.004%) |
| 34 | Battery Safety Information | Safety instructions for use, storage, and transport of the battery | e.g. Do not short-circuit, store between 10-25°C, UN3481 for air transport |
| 35 | Warranty Period | Commercial warranty period for the battery | e.g. 8 years or 160,000 km |
| 36 | Detailed Composition | Materials of the cathode, anode and electrolyte (Annex XIII 2(a)). Shown only to approved viewers. | e.g. Cathode NMC811 on Al foil; anode graphite/SiOx on Cu foil; electrolyte LiPF6 in EC/EMC |
| 37 | Manufacturer and Contact Point | Manufacturer name or trade mark, postal address with a single contact point, and web or email where available (Annex VI Part A(1)) | e.g. Kestrel Energy Ltd, 1 Dock Road, Hull HU1 1AA, UK. [email protected] |
Optional DPP Fields
These additional fields are recommended for Batteries products. Including them improves the completeness of your Digital Product Passport and can boost compliance scores.
| Field | Description | Example | |
|---|---|---|---|
| 01 | Energy Round-Trip Efficiency (%) | Energy round-trip efficiency per Annex IV — for stationary and LMT batteries | e.g. 92% |
| 02 | State of Certified Energy (SOCE) % | Remaining certified usable energy for EV batteries | e.g. 98% |
| 03 | Chemical Compliance | Compliance with chemical regulations (REACH, RoHS, etc.) | e.g. REACH compliant, RoHS certified |
| 04 | Country of Manufacture | Where the product was manufactured | e.g. United Kingdom |
| 05 | Capacity Fade (this battery) | Current capacity fade of this individual battery (Annex XIII 4(a)). Shown only to approved viewers. | e.g. 6.2% |
| 06 | Remaining Power Capability (this battery) | Current power capability of this individual battery (Annex XIII 4(a)). Shown only to approved viewers. | e.g. 4,800 W |
| 07 | Internal Resistance (this battery) | Current internal resistance of this individual battery (Annex XIII 4(a)). Shown only to approved viewers. | e.g. 17 mOhm |
| 08 | Use Data | Charge and discharge cycles, negative events and recorded temperature and state of charge, from the battery management system (Annex XIII 4(d)). Shown only to approved viewers. | e.g. 412 full cycles; no negative events; 12-38 °C; SoC log at /bms/export |
| 09 | Battery Status | Status of an individual battery: original, repurposed, re-used, remanufactured or waste (Annex XIII 4(c)). Set per battery under Individual batteries; a repurposed, re-used or remanufactured battery gets a new passport (Article 77(7)). | e.g. original |
| 10 | State of Health (SoH) % | State of health of an individual battery, per Article 14 and Annex VII (Annex XIII 4(b)). Set per battery under Individual batteries. | e.g. 95% |
| 11 | Minimum Voltage (V) | Minimal voltage of the battery, with the temperature range where relevant (Annex XIII 1(h)) | e.g. 40.0 V (0 to 45 °C) |
| 12 | Maximum Voltage (V) | Maximum voltage of the battery, with the temperature range where relevant (Annex XIII 1(h)) | e.g. 54.0 V (0 to 45 °C) |
| 13 | Power Limits and Temperature Range | Limits of the original power capability, for example continuous and peak power and for how long, with the temperature range where relevant (Annex XIII 1(i)) | e.g. 5 kW continuous, 7.5 kW peak for 10 s, 0 to 45 °C |
| 14 | Cycle Life Reference Test | The reference test used for the expected battery lifetime in cycles (Annex XIII 1(j)) | e.g. IEC 62620, 25 °C, 80% depth of discharge |
| 15 | Capacity Threshold for Exhaustion | The capacity at which the battery counts as exhausted. Electric vehicle batteries only (Annex XIII 1(k)) | e.g. 70% of rated capacity |
| 16 | Storage Temperature Reference Test | The reference test behind the temperature range the battery can withstand when not in use (Annex XIII 1(l)) | e.g. IEC 62660-2, 30 days at -40 °C and at +60 °C |
| 17 | Round Trip Efficiency at 50% of Cycle Life (%) | Round trip energy efficiency at 50% of cycle life; the initial figure goes in Energy Round-Trip Efficiency (Annex XIII 1(n)) | e.g. 90 |
| 18 | Internal Cell Resistance (mOhm) | Internal resistance of a battery cell (Annex XIII 1(o)) | e.g. 0.8 mOhm |
| 19 | Internal Pack Resistance (mOhm) | Internal resistance of the battery pack (Annex XIII 1(o)). A value in Internal Resistance is shown as the pack figure until you split it. | e.g. 15 mOhm |
| 20 | C-rate of the Cycle Life Test | The c-rate of the cycle-life test behind the expected lifetime (Annex XIII 1(p)) | e.g. 0.5C charge, 1C discharge |
| 21 | Usable Extinguishing Agent | The extinguishing agent that can be used on the battery (Annex XIII 1(a); Annex VI Part A(9)) | e.g. Water in large quantities |
| 22 | Carbon Footprint Study (Web Link) | Web link to the public version of the study supporting the carbon footprint values (Annex XIII 1(c); Article 7(1)(g)) | e.g. https://example.com/carbon-footprint-study.pdf |
| 23 | EU Declaration of Conformity Number | The identification number of the EU declaration of conformity (Annex XIII 1(c); Article 7(1)(f); Article 18) | e.g. DoC-KES-5-2027-01 |
| 24 | Waste Prevention and Re-use | The end-user's role in waste prevention: good practice for a longer use phase and the possibilities of re-use, preparation for re-use, preparation for repurposing, repurposing and remanufacturing (Annex XIII 1(s); Article 74(1)(a)) | e.g. Keep between 20% and 80% charge when stored; ask us about repair before replacing |
| 25 | Separate Collection | The end-user's role in the separate collection of waste batteries (Annex XIII 1(s); Article 74(1)(b)) | e.g. Never put a waste battery in household waste; hand it in for separate collection |
| 26 | Collection, Take-back and Treatment | Separate collection, take-back and collection points, preparation for re-use, preparation for repurposing and treatment available for waste batteries (Annex XIII 1(s); Article 74(1)(c)) | e.g. Free take-back from any dealer, or book a collection at example.com/takeback |
| 27 | Safety Instructions for Waste Batteries | Safety instructions to handle waste batteries, including the risks of batteries containing lithium (Annex XIII 1(s); Article 74(1)(d)) | e.g. Tape the terminals; do not crush or puncture; store dry and away from heat |
| 28 | Meaning of Labels and Symbols | The meaning of the labels and symbols on the battery, its packaging or its documents (Annex XIII 1(s); Article 74(1)(e)) | e.g. The crossed-out wheeled bin means: collect separately, never with household waste |
| 29 | Impact of Substances | The impact of the substances in the battery, in particular hazardous substances, on the environment, human health and safety, including from littering or discarding as unsorted municipal waste (Annex XIII 1(s); Article 74(1)(f)) | e.g. The electrolyte is flammable and harmful if released; lithium can ignite if damaged |
- Pre-configured Batteries fields
- GS1-compliant QR codes
- Compliance scoring dashboard
- Deadline tracking & alerts
Advising clients on this?
Consultancies, compliance firms and packaging printers can refer, resell or white-label the platform under their own name.
See the partner models5-Step Plan for Batteries DPP Readiness
01Inventory your batteries product range.
List every SKU sold into the EU with category, materials, and current data quality.
02Map applicable data fields.
Use the ESPR working plan to identify the likely DPP fields and align internal systems to feed them.
03Engage suppliers on data gaps.
Material composition, substance, and origin data depend on supplier cooperation. Issue formal data requests now.
04Run a DPP pilot.
Choose one product family, build the full passport, test the QR carrier, and use the pilot to flush out operational gaps.
05Set up governance.
Assign clear ownership for DPP data quality, update cadence, and registry integration as the delegated act approaches.
Frequently Asked Questions
What is a Digital Product Passport for Batteries?
A Digital Product Passport (DPP) for Batteries is a digital record that EU law requires for these products. It contains information about materials, sustainability data, compliance status, and supply chain traceability for batteries products.
When is the deadline for Batteries?
The legal date for Batteries is 18 February 2027. It is set in adopted EU law, and passports must be in place for products placed on the EU market from that date.
How many fields are required in a Batteries DPP?
Batteries Digital Product Passports require 37 mandatory fields and 29 optional fields. Required fields include core product data, materials composition, and sustainability metrics specific to the batteries sector.
When do Batteries DPPs become mandatory?
From 18 February 2027. The date is set in adopted EU law.
Does the DPP apply to non-EU Batteries producers?
Yes. Any Batteries product placed on the EU market requires a DPP regardless of where it is manufactured. Importers carry responsibility for ensuring DPP data is in place.
How is the DPP linked to the product physically?
Through a data carrier, typically a QR code, RFID tag, or NFC chip on the product, packaging, or accompanying documentation. The carrier resolves to the DPP via a unique product identifier.
What is the EU DPP Registry and is it live?
The EU DPP Registry is the central index of Digital Product Passports placed on the EU market: it holds each passport's registration identifier, not the passport itself. The Commission opened it on 20 July 2026, under Implementing Regulation (EU) 2026/1778. The first mandatory registrations are battery passports, for EV, LMT and industrial batteries above 2 kWh, from 18 February 2027.
How can Batteries producers prepare now?
Inventory your product range, map data sources, engage suppliers on data quality, choose a DPP hosting model, assign unique product identifiers, and run a pilot DPP on one product line before mandatory compliance dates arrive.
Related Industries
Dates on this page checked against EUR-Lex and the European Commission on 13 November 2026. See every date on one timeline
Create Batteries DPPs Today
Start generating ESPR-compliant Digital Product Passports for your batteries products. Free tier available with no credit card required.